The processing techniques and characteristics of PE protective film include casting, extrusion, and blow molding. PE protective film can be applied to many processing techniques, and there are many ways to form PE protective film. Among them, casting, extrusion, and blow molding are the three most common processing techniques. 1. Casting method for film formation […]
The advantages of applying protective film to glass. 1. Anti light pollution, health and environmental protection: The bedroom and living room are exposed to strong light reflection from the eaves and corners of the opposite building for a long time, which poses a risk of light pollution. Prolonged exposure to sunlight can make people tired,
Advantages and Quality Requirements of Glass Adhesive Protective Film Read Post »
PET protective film is widely used due to the properties of the PET protective film material. The PET protective film material is transparent and colorless, and its surface has undergone a tough treatment. Ordinary PET protective film materials have a tough surface value between 3H-4H depending on the place of origin. The harder the surface,
Knowledge of the properties and quality of PET protective film materials Read Post »
The treatment method for bubble formation in protective film. (1) Choosing the appropriate ink and increasing the coating amount are particularly important for the selection of dry composite white ink, as their impact is multifaceted. (2) Enhance the wettability of the adhesive on the film, improve the defects of poor local adhesion, increase the coating
What are the common problems in the treatment of bubble formation in protective film Read Post »
The residual adhesive treatment method of PE protective film. 1. Human factors: Some people think that PE protective film looks like just a layer of plastic film. Any type of protective film can meet their product needs, and even just feel like it can be applied well. This is a very perfunctory view. There are
Common problems in the treatment and use of residual adhesive in PE protective film Read Post »
The bonding between the PE protective film and the maintained product is not strong enough, and it may fall off during transportation and use. The reasons for these problems are exactly the opposite. The higher probability is that the polyurethane resin used in the manufacturing of the protective film product has insufficient viscosity. Another probability
Knowledge of PE protective film quality, transmittance, and structure Read Post »
